Auto Input(S) Sensing Feature - LG STB-2000 Setup Manual

This section provides detailed settings information for Installer Menu item 042 AUTO INPUTS.
Note: When both item 042 AUTO INPUTS and item 041 SIMPLINK EN are enabled in the Installer Menu,
HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function.
In the Installer Menu, an informational code is displayed at the right of each Auto Inputs value, for example:
STB_2000 PTC INSTALLER MENU
CPU-CTV
042 AUTO INPUTS
UPN 000-000-000-000
PTC V1.00.020
Each code consists of eight characters that identify the Aux input(s) for which auto-sensing is enabled. The
following table identifies the Installer Menu display code Input # for each Aux input that is available on the
STB-2000. The table also identifies the Installer Menu item associated with each Aux input. Remember that
in order for auto-sensing to be enabled for an input, that input must also be enabled in the Installer Menu.
Installer Menu Aux
Display Code Input
Input #
0 AV1
6 HDMI 1
7 HDMI 2
To disable auto-sensing for all available Aux inputs, set item 042 to 0. To enable auto-sensing for all available
Aux inputs, set item 042 to 255. All other available settings (i.e., settings for individual inputs), are listed in the
table below.
Item 042
Value
AV1
001 Enabled
064 Disabled
065 Enabled
128 Disabled
129 Enabled
192 Disabled
193 Enabled
X = Aux input source is Disabled or Not Available (i.e., on this STB model)
D = Auto-sensing for input is Disabled
Input # = Auto-sensing for input is Enabled
206-4256
193 76XXXXX0
ASIC D279
STB V3.08.00
Installer Menu
Item Function
039 REAR AUX EN
035 HDMI1 ENABLE
091 HDMI2 ENABLE
Inputs
HDMI 1 HDMI 2
Disabled Disabled
Enabled Disabled
Enabled Disabled
Disabled Enabled
Disabled Enabled
Enabled Enabled
Enabled Enabled
Reference: Auto Input(s) Sensing Feature
AUTO INPUTS Display Code
This example illustrates Installer Menu item 042
value 193, which enables auto-sensing for all avail-
able Aux inputs. The input #s in the display code (7,
6, 0 in this example) identify the enabled Aux inputs.
See first table below for a listing of the STB-2000
Aux inputs and their corresponding display code
input #s. The second table below shows the display
codes for all item 042 values.
Installer Menu
Display
DDXXXXX0
D6XXXXXD
D6XXXXX0
7DXXXXXD
7DXXXXX0
76XXXXXD
76XXXXX0
67