Simplified Voice Message Access - Panasonic KX-NCP500 Programming Manual

Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
11.1 [9-1] TIE Table
Feature Manual References
13.1.17 Private Network Features—NDSS (Network Direct Station Selection)
6.1.4 Flexible Numbering/Fixed Numbering

Simplified Voice Message Access

Specifies the feature number used to access the SVM feature to record, listen to and delete messages.
Default
*38
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
6.9 [4-1-7] Wired Extension—Simplified Voice Message
6.16 [4-2-5] Portable Station—Simplified Voice Message
Feature Manual References
16.1.9 SVM (Simplified Voice Message)
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different locations
in a TIE line network. The leading numbers of all PBXs in the network that will be called should be entered in
this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Default
Not stored.
Document Version 2011-10
4.9 [2-6-1] Numbering Plan—Main
PC Programming Manual 429