Utility-System Reset-Reset By The Command - Panasonic KX-NCP500 Programming Manual

2.6.22 Utility—System Reset—Reset by the Command
2.6.22 Utility—System Reset—Reset by the Command
Updates the main system program and data files stored within the PBX using files taken from the SD memory
card, and resets the connected PBX.
This option is only available at Installer level.
Two copies of each of the main system files can be stored on the SD memory card. The names of these files
are as follows:
KX-NCP500/KX-NCP1000
File Name
DBSYS
DBSYS_S
PBMPR
PBMPR_S
KX-TDE100/KX-TDE200
File Name
DMSYS
DMSYS_S
PMMPR
PMMPR_S
KX-TDE600
File Name
DGSYS
DGSYS_S
PGMPR
PGMPR_S
When new DBSYS/DMSYS/DGSYS and PBMPR/PMMPR/PGMPR files are transferred from a connected PC
to the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.6.2 Utility—File Transfer
PC to PBX (SD Card)), they are stored as the backup files. To use these files on the PBX, it is necessary to
first swap them with the currently active files on the SD memory card.
To update system files and reset the PBX
1.
From the Utility menu, point to System Reset and then click Reset by the Command.
2.
Choose whether to back up current system data or not.
•
Click SD Backup to back up the current system data to the SD memory card before proceeding.
66 PC Programming Manual
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the IPCMPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the IPCMPR board of
the PBX.
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data for
the PBX.
Backup main system data file
PBX program file. Contains the software to run the IPCEMPR board of
the PBX.
Backup PBX program file
Document Version 2011-10