Panasonic KX-NCP500 Programming Manual page 660

6.5 [4-1-4] Wired Extension—Flexible Button
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Default
1
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
1–8
For KX-TDE600:
1–32
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
17.1.5 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, G-DN, SDN)
Specifies the ring tone type.
Default
1
Value Range
KX-DT300 series (except KX-DT321)/KX-T7600 series/IP-PT (except NT265/KX-NT321): 1–30
KX-DT321/NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
None
660 PC Programming Manual Document Version 2011-10