System Speed Dial - Panasonic KX-NCP500 Programming Manual

Programming Manual References
4.4 [2-2] Operator & BGM
Feature Manual References
17.1.3 Tenant Service
12.1.5 Operator Features
ARS Mode
Specifies the ARS mode used when making a CO line call.
Default
Same as System Setting
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line Access
method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO Line
Access method.
Same as System Setting: The setting specified in
Maintenance Console Location
8.6 [6-6] Tenant
Programming Manual References
10.1 [8-1] System Setting
Feature Manual References
1.1.3 ARS (Automatic Route Selection)
17.1.3 Tenant Service

System Speed Dial

Specifies which system speed dialing table is used by the tenant.
Default
Same as System Setting
Value Range
Same as System Setting: PBX common system speed dialing numbers are used.
Tenant Exclusive: Individual tenant system speed dialing numbers are used.
Maintenance Console Location
8.6 [6-6] Tenant
Document Version 2011-10
ARS Mode in 10.1 [8-1] System Setting is applied
8.6 [6-6] Tenant
PC Programming Manual 799