Chapter 2 Preparations
1.8
Removing Support Bar
You need to remove support bar when installing or removing the following component or changing internal
cable connection:
DIMM
Additional HDD cage
Battery for RAID Controller
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Remove the two screws from support bar.
3.
Lift the support bar, and remove it from the server.
52
Processor (CPU)
PCI card
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices