Table of Contents
Advertisement
Chapter 3 Setup
<F3> key:
<F4> key: Run Offline Tools. For information on Offline Tools, refer to Chapter 1 Maintenance (9.
<F12> key: Boot from network.
6.
If a controller which has its dedicated BIOS such as a RAID Controller board is installed, a
message that prompts you to start the dedicated utility to set each board is displayed.
Example: If an optional RAID Controller is installed
Press <Ctrl> <H> for Web BIOS
The utility starts by pressing <Ctrl> + <H> keys.
For details on the utility, refer to the manual supplied with each optional board.
Depending on the configuration, the message "Press Any Key" might appear to prompt a key entry.
This is a behavior of the BIOS of the optional board. Continue to operate after checking the
manual of the optional board.
7.
The OS starts when POST is completed.
1.1.2
POST error messages
When POST detects an error, it displays an error message on the screen or beeps for some errors. For
descriptions of error messages, causes, and countermeasures, refer to Chapter 3 (1. POST Error
Message) in "Maintenance Guide".
126
Run EXPRESSBUILDER from Internal Flash Memory (optional). For information on
EXPRESSBUILDER, refer to Chapter 3 (4. EXPRESSBUILDER).
Note
• If the optional Internal Flash Memory is not installed in the system, <F3> key
message will not be displayed.
• <F3> key must be pressed within 5 seconds of the message being displayed.
• Note that the server will not boot from Internal Flash Memory even if it is
specified to do so by pressing <F3> key, as long as a bootable CD/DVD-ROM is
set on the drive.
Offline Tools) in "Maintenance Guide".
Note
Take notes on the indication displayed on display unit before consulting with your
sales representative. Alarm messages are useful information for maintenance.
Express5800/R120d-2M User's Guide
1. Turning on the Server
Advertisement
Table of Contents
