Table of Contents
Advertisement
Chapter 2 Preparations
6.
Insert RAID Controller into the slot dedicated to RAID Controller.
7.
Secure the RAID Controller bracket with two screws you have removed in Step 4.
8.
Disconnect SAS/SATA cable from SATA connector on motherboard.
8-1 When four or less hard disk drives are installed:
Connect SAS/SATA cable removed in Step 9 to connector (Ports 0-3) on RAID Controller.
8-2 When five or more hard disk drives are installed:
Connect SAS/SATA cable removed in Step 9 to connector (Ports 0-3) on RAID Controller.
Connect SAS/SATA cable provided with the server to connector (Ports 4-7) on RAID
Controller.
Remove a single screw from server chassis, and remove battery tray for RAID Controller.
Connect another end of SAS/SATA cable that has been connected to connector (Ports 4-7)
on RAID Controller, to the connector on backplane.
Secure the battery tray for RAID Controller with a single screw.
9.
Continue to install or remove internal optional devices, mount and connect the server, and turn it
on.
94
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
