Table of Contents
Advertisement
Chapter 2 Preparations
1.20
Use of Internal hard disk drives in the RAID System
This section describes how to use the hard disk drives installed in the HDD cage at the front of the server in the
RAID System.
If using internal hard disk drives in RAID System with an optional RAID Controller (N8103-149/150/151/160)
installed in the server, the SATA cable needs to be rewired.
100
Important
If you use hard disk drives in the RAID System or change the RAID level,
initialize the hard disk drives. If the hard disk drive contains valuable data,
be sure to backup the hard disk drive before installing the RAID Controller
and configuring the RAID System.
Note
In the RAID System, use hard disk drives that have the same specifications
(capacity, rotational speed, and standard) for each Disk Array.
Tips
Logical Drives can be created even with only one Physical Device.
Tips
When using SAS hard disk drives, RAID Controllers must be connected.
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
