Equipment Compatibility For Legacy Gateways - Panasonic KX-NS1000 Installation Manual

SIP based DECT
•
DECT Cell Station Unit (SIP) Using a V-UTEXT32 Card for DECT Portable Station (SIP) (KX-UDS124)
Doorphones
•
Doorphone (KX-T30865, KX-T7765)
Telephones
Panasonic Proprietary Telephones
•
IP proprietary telephones (e.g., KX-NT300 series, KX-NT500 series)
•
IP softphones (e.g., KX-NCS8100)
•
Portable stations (e.g., KX-TCA364, KX-WT115)
SIP Phones
•
KX-UT series SIP phones (e.g., KX-UT133, KX-UT248, KX-UT670)
•
KX-UDT series portable stations (e.g., KX-UDT111)
•
IP conferencing phones (e.g., KX-NT700)
•
Third party SIP phones (SIP hardphones/SIP softphones)
Other
•
Single line telephones
Note
•
For the equipment (e.g., Add-on Key Module, USB Module, Headset) that can be connected to a
particular telephone, refer to the telephone's manual.
•
For other equipment that can be connected to the PBX, refer to "2.1.2 System Connection Diagram".
•
The PBX does not support the following Panasonic proprietary telephones:
–
Analogue proprietary telephones
–
Digital proprietary telephones
–
KX-NT136 IP proprietary telephone
–
KX-NT400 IP proprietary telephone
–
KX-HGT100 SIP telephone
Trunk Adaptors
•
E1 Trunk Adaptor (KX-NS8188)
•
PRI Adaptor (KX-NS8290)

Equipment Compatibility for Legacy Gateways

You can connect the following PBXs to a KX-NS1000 as legacy gateways.
•
KX-NS1020
•
KX-NCP series PBX
•
KX-TDE series PBX
•
KX-TDA series PBX
•
KX-TDA100D
Connecting legacy gateways expands the usage of legacy terminals and trunks.
If a legacy gateway is connected to a KX-NS1000, the following equipment is also supported.
Note
In this manual, KX-TDA100D is not included in KX-TDA series.
Cell Stations
DECT
•
2-Channel Cell Station Unit Using a DHLC/DLC Card (PT-interface CS) for DECT Portable Station
(KX-TDA0141CE)
System Components
Installation Manual 11