Panasonic KX-NS1000 Installation Manual page 37

Example:
KX-NS1000
KX-NCP500
KX-NCP1000/
KX-NS1020
STACK-S (NCP)
One-Look Network with NS-Net
Multiple KX-NS1000 PBXs can be connected as a distributed networked system using a private IP network.
The networked system is called a One-look network and it can contain up to 16 KX-NS1000 PBXs and up to
8 legacy gateways. In a One-look network, one PBX serves as the Master unit, which controls the other PBXs,
known as Slave units. The Slave units share setup information and resources controlled by the Master unit. A
One-look network is useful when the network will consist only of KX-NS1000 PBXs and a private IP network
is feasible. A considerable amount of setup is done automatically by the PBXs, so setup and maintenance is
much simpler than other type of networks, such as a TIE line network. All units can be programmed from one
location. Resource sharing allows users to interact as if they were all connected to one PBX, which eliminates
the need to manage information such as PBX access codes.
For details about programming the One-look network, refer to "5.5 Programming a One-look Network".
For details about using a One-look network, refer to "4.2 One-look Networking" in the Feature Guide.
NS-Net is a network protocol only used for Panasonic products.
*1
KX-TDE600
KX-TDA600
STACK-S
(TDE)
*1
STACK-M
KX-TDE100
KX-TDA200
STACK-S
(TDE)
2.1.1 System Configurations
KX-TDA100D
KX-TDA100D
STACK-S
(TDE)
Installation Manual 37