Steering Column Assembly Inspection; Ignition Switch Cylinder Assembly Removal And Installation (Without Keyless Start System) - Suzuki GRAND VITARA Owner's Manual

Grand vitara
Hide thumbs Also See for GRAND VITARA:
Table of Contents

Advertisement

6B-10 Steering Wheel and Column:
12) Install instrument panel under cover (1) to instrument
panel.
1
13) Install steering column hole cover (1).
14) If steering wheel is removed, install it by referring to
"Steering Wheel Removal and Installation: ".
15) Connect negative (–) cable to battery.
16) After installing steering column assembly, be sure to
enable air bag system by referring to "Enabling Air
Bag System: in Section 8B".

Steering Column Assembly Inspection

Check steering column for damage and operation
referring to "Checking Steering Column for Accident
Damage: ".
Ignition Switch Cylinder Assembly Removal
and Installation (Without Keyless Start System)
Removal
1) Disconnect negative (–) cable at battery.
2) Disable air bag system referring to "Disabling Air
Bag System: in Section 8B".
3) Remove steering column upper and lower covers.
4) Remove immobilizer control module referring to
"Immobilizer Control Module (ICM) Removal and
Installation: in Section 10C".
I5JB0A620018-01
1
I5JB0A620011-01
S5JB0A6206007
S5JB0A6206015
5) Remove ignition switch cylinder assembly as follows.
a) Turn ignition key to "ACC" position.
b) Insert 2 mm (0.078 in.) rod (2) through hole (3)
and push ignition switch cylinder lock.
c) Detach ignition switch cylinder assembly (1) from
steering lock assembly (4).
Installation
1) Install ignition switch cylinder assembly as follows.
a) Turn ignition key to "ACC" position.
b) In this state, push ignition switch cylinder
assembly into steering lock assembly till it clicks.
2) Install immobilizer control module (ICM) referring to
"Immobilizer Control Module (ICM) Removal and
Installation: in Section 10C".
3) Install upper and lower cover and screws (1).
CAUTION
!
When installing covers, be careful so that
each lead wire is not caught between covers.
*: Standard screw
**: Tapping screw
4) Enabling air bag system referring to "Disabling Air
Bag System: in Section 8B".
2
3
1
4
I5JB0A620025-01
1**
1*
I5JB0A620026-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents