Ebd Warning Lamp (Brake Warning Lamp) Comes On Steady - Suzuki GRAND VITARA Owner's Manual

Grand vitara
Hide thumbs Also See for GRAND VITARA:
Table of Contents

Advertisement

4E-16 ABS:

EBD Warning Lamp (Brake Warning Lamp) Comes ON Steady

Wiring Diagram
WHT/GRN
7
2
1
[A]: ABS hydraulic unit / control module connector
(viewed from terminal side)
1. Battery
2. Main fuse box
3. Ignition switch
4. Circuit fuse (in junction block assembly)
Circuit Description
EBD warning lamp (brake warning lamp) is controlled by parking brake switch, brake fluid level switch and ABS
hydraulic unit / control module assembly through lamp driver module in combination meter.
EBD warning lamp turns ON when parking brake switch is ON and/or brake fluid level is lower than minimum level.
The information of parking brake switch and brake fluid level are transmitted from BCM to lamp driver module in
combination meter through CAN communication line.
Troubleshooting
Step
1
1) Make sure that:
• Parking brake is completely released.
• Brake fluid level is upper than the minimum level.
Are the check results OK?
2
1) Turn ignition switch to ON position.
Does "ABS" warning lamp come on steady?
3
1) CAN communication circuit between combination meter,
ABS hydraulic unit / control module and BCM referring to
"DTC U1073: Control Module Communication Bus Off: ".
Is CAN communication circuit in good condition?
WHT/BLU
WHT/RED
3
BLK/YEL
5
PPL/RED
6
8
BLK
12
RED
WHT
RED
WHT
9
10
RED/BLK
11
RED/BLK
5. Combination meter
6. ABS warning lamp
7. EBD warning lamp (Brake warning lamp)
8. Lamp driver module
9. BCM
Action
E03-1
12V
E03-14
4
12V
GRN/ORN
E03-7
14
RED
E03-12
WHT
E03-6
13
E03-13
BLK
E03-26
BLK
Go to Step 2.
Perform "ABS Warning
Lamp Comes ON
Steady: " previously
outlined.
Substitute a known-
good combination meter
and recheck. If ABS
warning lamp remains
ON, substitute a known-
good ABS hydraulic unit
/ control module
assembly and recheck.
[A]
E03
14
1
15
2
16
3
17
4
18
5
19
6
20
7
21
8
22
9
23
10
24
11
25
12
26
13
10. Parking brake switch
11. Brake fluid level switch
12.
CAN junction
13. To TCM, 4DW control module and keyless start
control module
14. ABS hydraulic unit / control module assembly
Yes
Release parking brake
completely and/or
replenish brake fluid.
Go to Step 3.
Repair or replace.
S5JB0A4504011
I5JB0A450011-02
No

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents