System Configuration
Quarantining, 802.1X
NOTE:
3-60
Figure 3-29. Add 802.1X Device, Test Connection Area Option 2
2.
For ProCurve, Nortel, Other switches (figure 3-28),:
a.
Select the Method to execute the re-authentication command in test:
–
802.1X
–
MAC auth
b. Enter the port of the endpoint being tested in the Port text field.
Enter the MAC address of the endpoint being tested in the MAC
c.
address text field.
For Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches (figure 3-
3.
29) if you want to include the re-authentication command as part of the
test, select the Re-authenticate an endpoint during test check box and:
Enter the port of the endpoint being tested in the Port text field.
a.
b. Enter the MAC address of the endpoint being tested in the MAC
address text field.
You must enter the port, the MAC address, or both, depending on the re-
authentication OID.
4.
Click test connection to this device.
Cisco IOS
To add a Cisco IOS device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Add an 802.1X device