Catos User Name In Enable Mode - HP 800 User Manual

System Configuration
Quarantining, 802.1X
TIP:
3-64
10. Enter the password with which to enter enable mode.
11. Re-enter the enable mode password.
12. Enter the networks (using CIDR notation) that this device is in direct
control over in the Network list text field. This is only necessary if the
device does not send its IP address with its supplicant request.
13. Enter the Cisco port mask in the text field. This specifies which characters
within the endpoint identifier returned by the Cisco device contain the
bank and port information of the endpoint. All offsets start at 0, so a mask
of 2/34 indicates character 3 for the bank and characters 4 and 5 for the
port. If the Cisco device were to return 50210 for an endpoint, a port mask
of 2/34 would indicate that the endpoint is on bank 2 and port 10 (2/10),
where 210 are the third, fourth and fifth bytes in the identifier.
14. Enter the Reconnect idle time. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
15. Select the Show scripts plus symbol to show the following scripts:
• Initialization script – The expect script used to log into the console and
enter enable mode.
Re-authentication script – The expect script used to perform endpoint
•
re-authentication.
Exit script – The expect script used to exit the console.
•
16. Click ok.
Click revert to defaults to restore the default settings.

CatOS User Name in Enable Mode

If you have your CatOS switch configured to run in enable mode with a user
name, the expect script supplied with NAC 800 will not run "out of the box."
Workaround: Do not use a user name with your switch, or modify the expect
script in the console to include the user name.
To modify the expect script in the NAC 800 user interface:
Home window>>System configuration>>Quarantining menu option
1. Click edit next to an 802.1X device. (You can also perform these steps
while you are adding an 802.1X device.)
Click the plus sign next to Show scripts.
2.