Configuring the Post-connect Server
Overview
A-2
Overview
This section describes how to configure the remote server for use with the
NAC 800 post-connect feature. The post-connect server can be a Windows
server or a Linux server. This section details the following:
■
"Extracting the ZIP File" on page A-3
•
"Windows" on page A-3
•
"Linux" on page A-3
■
"ZIP File Contents" on page A-4
"Setting up a Post-connect Host" on page A-5
■
•
"Windows" on page A-5
•
"Linux" on page A-6
"Viewing Logs" on page A-9
■
■
"Testing the Service" on page A-10
"Configuring your Sensor" on page A-11
■