Enabling The Plug-In And Adding Servers - HP 800 User Manual

NOTE:
Figure 13-7. Add DHCP Plug-in Configuration

Enabling the Plug-in and Adding Servers

To enable the DHCP plug-in and add the DHCP servers:
Home window>>System configuration>>Quarantining
Select the DHCP radio button in the Quarantine area.
1.
Select the DHCP servers using the DHCP plug-in radio button (figure 13-2).
2.
Changes made while one or more DHCP servers cannot be communicated
with will be sent to those DHCP servers as soon as communication is re-
established.
Select Add a DHCP plug-in configuration. The Add DHCP plug-in configuration
3.
window appears as shown in the following figure:
4. Enter the IP address or host name of the DHCP server where the plug-in
is to be installed in the DHCP server hostname or IP address text box.
5. Enter the port number on the DHCP server that listens for plug-in requests
in the Plug-in listening port text field.
Enter a brief description of this DHCP server's purpose in the Server
6.
description text field.
Select a Plug-in logging level, where:
7.
error – Log error-level messages only (least amount of detail)
•
• warning – Log warning-level and above messages only
• info – Log debug-level and above messages only
debug – Log everything (most amount of detail)
•
DHCP Plug-in and the NAC 800 User Interface
DHCP Plug-in
13-11