Scan Motor (Cis Unit Drive Belt) - Toshiba e-studio166 Service Handbook

3.7.3 Scan motor (CIS unit drive belt-2)
When installing the scan motor and CIS unit drive belt-2, adjust the tension of the CIS unit drive belt-2
with the belt tension jig.
<Procedure>
(1) Temporarily fix screws A and B.
(2) Hook the belt tension jig on the motor
bracket and frame.
(3) Tighten screws A and B where the scan motor pulled by the belt tension jig stops.
e-STUDIO163/166/203/206
ADJUSTMENT
Scan motor
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
3 - 40
A B
Scan motor
Fig. 3-26
Belt tension jig
Fig. 3-27