Toshiba e-studio166 Service Handbook page 77

Classifi-
Code
cation
1372 Counter Heater and energizing time
accumulating counter Dis-
play/0 clearing
1378 Counter Counter for period of time
fuser unit is at ready tem-
perature
1380 Counter Counter for period of time
fuser unit is at printing tem-
perature
1382 Counter Counter for period of time
fuser unit is at energy sav-
ing temperature/Counter
reset
1385 Counter Number of output pages
(Thick paper 1)
1386 Counter Number of output pages
(Thick paper 2)
1388 Counter Number of output pages
(OHP film)
1410 Counter Counter for period of toner
cartridge rotation time
1411 Counter Counter for envelope
1628-0 Process- Drum life correction switch-
ing ing of the drum reverse
rotation amount
1628-1 Process- Drum life correction switch-
ing ing of the normal drum
rotation amount after the
reverse rotation
1913 Process- The function clear LED
ing blinks
© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<8 digits>
ALL
<0-15>
ALL
<0-15>
PPC
2 - 57
06/05
RAM Contents
able
0 M Counts up the heater
control time accumu-
lated (when power of
the equipment is ON)
but does not count at
the Sleep Mode.
0 M Counts up the heater
control time accumu-
lated (when the equip-
ment is at ready status).
0 M Counts up the heater
control time accumu-
lated (during printing).
0 M Counts up the heater
control time accumu-
lated (when the equip-
ment is in the Energy
Saving Mode).
0 M Counts up when the
registration sensor is
ON.
0 M Counts up when the
registration sensor is
ON.
0 M Counts up when the
registration sensor is
ON.
0 M Counts up the period of
rotation time of the
toner cartridge.
0 M Counts up when the
registration sensor is
ON.
4 M Drum life correction
switching of the drum
reverse rotation amount
9 M Drum life correction
switching of the normal
drum rotation amount
after the reverse rota-
tion
1 SYS Blinks when the value is
<0-1> different from the
present default value
after copying (until auto
clear or all clear.)
0: Invalid (Always off)
1: Valid
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
1
1
1
1
1
1
1
1
1
1
1
1
e-STUDIO163/166/203/206
2