Table of Contents
Advertisement
SET PROFILE 1
START VOLUME
1
To set the start volume:
1. Enter the Set Profile display and use the
2. Press the
increase or decrease the volume. The handset will produce the ringer sound in the
increased or decreased loudness setting. It is also possible to switch the ringer
volume OFF in this setting.
3. Press the
display.
9.1.7. Out of range
Each handset is equipped with an out of range detection option The out of range
option alerts the user when the connection between the handset and the iS3000
system is lost. When a user walks out of the coverage area of the iS3000 system the
handset will give 3 indications:
1. An indication OUT OF RANGE and the disappearance of the
display as long as the handset is out of range.
2. A handset will give 3 short bleeps when it gets out of range.
3. The LED on top of the handset will flash for 4 seconds when it gets out of range.
When the user re-enters the coverage area the handset will give one short bleep and
all out of range indications stop.
SET PROFILE 1
OUT OF RANGE
1
To switch the out of range tone on/off:
1. Enter the Set Profile display and use the
2. Press the
select tone on or off. The current setting is shown in capitals.
34
START VOLUME
OK
key to enter the ringer volume display. Use the
OK
key to set the volume. The handset will return to the Set profile
OK
OUT OF RANGE
OK
TONE ON
key to enter the out of range display and use the
OK
or
2
or
or
2
or
START VOLUME.
OK
3
key to select start volume.
or
icon in the
OUT OF RANGE
OK
TONE OFF
3
key to select out of range.
or
keys to
key to
Advertisement
Table of Contents
