9.1.15 IP-PT (IP Proprietary Telephone)
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX through
a network hub or other splitting device, and can have a PC connected to the secondary Ethernet port.
[Connection Example]
PBX
Private IP
V-IPEXT
Network
Primary
Ethernet Port
Main Office
Conditions
•
A V-IPEXT card is required to use IP-PTs.
•
IP-PT registration is required through system programming before an IP-PT can be used with the PBX. An
IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-PTs, see
the IP Networking Guide.
•
The following features cannot be used with an IP-PT:
–
XDP (® 13.1.2 Paralleled Telephone)
–
Digital XDP (® 13.1.2 Paralleled Telephone)
–
OHCA (® 12.1.3 OHCA (Off-hook Call Announcement))
–
Walking Extension (® 20.1.2 Walking Extension)
–
Using PC Phone or PC Console on a connected PC (® 13.1.5 PC Console/PC Phone)
•
The KX-NT265 does not have a secondary Ethernet port.
•
The following optional devices are available for the KX-NT400/KX-NT300 series (except KX-NT321) IP-PT:
–
KX-NT307(PSLP1528) Bluetooth
–
KX-NT303 Add-on 12 Key Module (not available for KX-NT400 or KX-NT366)
–
KX-NT305 Add-on 60 Key Module (not available for KX-NT400 or KX-NT366)
•
KX-NT307(PSLP1528) Bluetooth Module
A Bluetooth wireless headset can be registered to an KX-NT400/KX-NT300 series (except KX-NT321)
IP-PT containing the KX-NT307(PSLP1528) Bluetooth Module through personal programming. When
Headset Mode is off, the Bluetooth headset can be used to answer calls or redial. In this case, Headset
Mode will turn on automatically, and will turn off after you hang up.
This Bluetooth Module is also compatible with KX-DT343/KX-DT346 DPTs.
•
Calls made using a Bluetooth wireless headset will not be disconnected immediately when the user
wanders out of range. However, if the Bluetooth wireless headset user remains out of range for a specified
time period, the call will be disconnected.
•
Automatic Rerouting to Secondary PBX
A KX-NT400/KX-NT300 series IP-PT can automatically connect to a secondary PBX, when the primary
PBX becomes disconnected.
Installation Manual References
3.4.1 Virtual Cards
166
Feature Manual
IP-PT
PC
IP-PT
Secondary
Ethernet Port
Module
®
IP-PT
Branch Office
Document Version 2009-12