Controlling A Conference - Huawei TE30 Quick Start Manual

HUAWEI TE30 Videoconferencing Endpoint
Quick Start Guide


Controlling a Conference

Select Conference control from the menu bar. Then use the conference controls
listed in the following figure.
Use...
View Site
Request Chair
Request Floor
Disconnect Site
Delete Site
Broadcast Site
Call Site
Issue 03 (2013-03-27)
To...
View a site (available for all sites) or multiple sites in turn
at preset intervals (available for the chair site only).
Request chair control rights.
Request the floor. This function is useful especially when a
remote site is being broadcast.
Disconnect a site from the conference.
Delete a site that has or has not joined the conference.
Force all the sites in the conference to view the broadcast
site.
The chair site can broadcast one site at a time or multiple
sites in turn at preset intervals.
Call an absent site in the site list to join the conference.
To call all absent sites to join the conference, click Call
All.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
During a multipoint conference, the
menu bar is like the one shown to the
left.
: indicates that you can send

instant messages to specified sites.
: indicates that you can switch

the conference between video and
audio-only states.
The TE30 does not provide any
conference controls during point-to-point
conferences.
Controlling a Conference
13