Huawei TE30 Quick Start Manual page 8

Configuring the TE30
Parameter
Password
Huawei GK
Setting SIP Parameters
Parameter
Register
with server
8
Description
Password used by the TE30 to
register with the GK. The GK
uses the password to
authenticate your TE30.
Whether to enable the Huawei
GK.
If the Huawei GK is disabled,
some functions, such as
Conference Control, are
unavailable on the TE30.
Description
Whether to register with the SIP
server.
If you select this option, the

TE30 will register with the
SIP server. After the TE30
successfully registers with the
SIP server, it can call
endpoints defined in the
address book by their IP
addresses, numbers, and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI TE30 Videoconferencing Endpoint
Setting
Obtain the password from
your network service
provider.
Ensure that this password
is the same as that
predefined on the GK.
By default, this option is
deselected.
Deselect this option if your
TE30 is interoperating with
endpoints of other
suppliers.
Click Next. On the screen shown to
the left, set SIP parameters.
Setting
By default, this option is
deselected.
Quick Start Guide
Issue 03 (2013-03-27)