Panasonic KT2 Instruction Manual page 12

Delay action type selection
• Selects a delay action type for Timer function.
• Available only when Timer function is selected during A1 or A2
type selection.
• : ON delay
: OFF delay
: ON/OFF delay
ON
(Contact Closed)
DI
(Digital
OFF
input)
(Contact Open)
ON
ON delay
OFF
ON
OFF delay
OFF
ON
ON/OFF
delay
OFF
Delay time setting
• Sets delay time for the Timer function.
• Available only when Timer function is selected during A1 or A2
type selection.
• Setting range: 0 to 9999 seconds
Direct/Reverse control action selection
• Selects Reverse (Heating) or Direct (Cooling) control action.
・
: Reverse (Heating) action
: Direct (Cooling) action
AT bias setting
• Sets bias value when performing auto-tuning.
See page 22 for PID auto-tuning.
• Not available for DC input
• Setting range:
0 to 50
Setting item not used
This item is indicated when Serial communication option is added.
However, this cannot be used.
OUT/OFF key function selection
• Selects whether OUT/OFF key is used for control output
OUT/OFF function (Fixed value control) or for program control
RUN/STOP function.
• : Control output OUT/OFF function (Fixed value control)
: Program control RUN/STOP function
Step time unit selection
• Selects Step time unit for the program control function.
• Not available if control output OUT/OFF function (Fixed value
control) is selected during [OUT/OFF key function selection].
• : Hour:Minute
: Minute:Second
12
DLY
DLY
DLY
DLY
DLY: Delay time setting
(Fig. 5.6-1)
Reverse (Heating)
(0 to 100 ) or 0.0 to 50.0
Control output
OUT/OFF function
ON delay
0 seconds
20
(0.0 to100.0 )
Hour:Minute