Opening the Chassis
To open the chassis:
1. Remove the thumbscrews shown on the rear of the
chassis.
Fig. 1:
2. Slide the cover of the chassis towards the back of the
system and than lift it away.
Removing the Front Panel
To remove the front panel, first open the chassis (see
Opening the Chassis), then do as follows:
1. Press upwards on the three latches shown in Fig. 3: to
free them.
2. Gently pull the right side of the front panel toward you in
order to free two more latches found below the 5.25" bay.
3. Once the right side is free, pivot the front panel toward
you until it is totally released.
Removing the thumbscrews
Fig. 2:
Sliding away the cover
Disassembly and Reassembly - 3
A