Removing The Motherboard - NEC FlexATX Chassis Disassembly Manual

Opening the Chassis), and follow these steps:
1. Disconnect all cables from the card to be removed.
2. Remove the one screw holding the card in place.
3. Carefully extract the card from its slot and from the
system.

Removing the Motherboard

To remove the motherboard, first open the chassis (see
Opening the Chassis), then remove the 3.5" / 5.25" bay
assembly (see Removing the 3.5" / 5.25" Bay Assembly).
Remove any add-on card (see Removing Add-On Cards).
When this is done, perform the next operations:
1. Disconnect all cables from the motherboard.
2. Remove the memory modules and the CPU from the
motherboard.
3. Remove the screws that hold the motherboard in its
place.
Fig. 14: Removing the motherboard
4. Carefully lift the motherboard out of the chassis.
Fig. 13: Removing add-on cards
Disassembly and Reassembly - 8
B
B