Removing The Front Usb Panel - NEC FlexATX Chassis Disassembly Manual

Fig. 7:
3. Slide the hard disk drive bay sidewise to free it from the
latches on the bottom of the chassis.
Fig. 8:
4. Remove the screws that hold the hard disk drive to its
bay.

Removing the front USB panel

To remove the front USB panel, first open the chassis (see
Opening the Chassis), remove the front panel (see Removing
the Front Panel) and perform the next steps:
1. Disconnect the USB cable and the LEDs cable from the
motherboard.
2. Remove the screws holding the USB panel in place.
Fig. 10: Removing the USB panel screws
Freeing the hard disk drive bay
Latches on the bottom of the chassis
Fig. 9: Hard disk drive screws
Disassembly and Reassembly - 6
B
C
D