Removing The Hdd - NEC FlexATX Chassis Disassembly Manual

Fig. 5:
Removing the CD/DVD-ROM Drive
To remove the CD/DVD-ROM drive, first open the chassis
(see Opening the Chassis), then remove the front panel (see
Removing the Front Panel) and then remove the 3.5" / 5.25"
bay assembly (see Removing the 3.5" / 5.25" Bay Assembly).
After that, follow the next steps:
1. Remove the screws on the bottom of the CD/DVD-ROM
drive.
2. Slide out the CD/DVD-ROM drive from the front of the
bay.
Fig. 6: Removing the CD/DVD-ROM drive from its bay

Removing the HDD

To remove the HDD, first open the chassis (see Opening the
Chassis) and then remove the 3.5" / 5.25" bay assembly (see
Removing the 3.5" / 5.25" Bay Assembly). After that, follow
the next steps:
1. Disconnect all cables from the hard disk drive.
2. Remove the screws that hold the hard disk drive bay to
the chassis.
Removing the FDD from its bay
Disassembly and Reassembly - 5
B
C