Viewer Part> Reference; Saving Images And Audio Sounds On A Usb Flash Memory (Export); Saving As A Video Or Still Image - JVC VR-X3200U Instructions Manual

<Viewer Part> Reference
Saving Images and Audio
Sounds on a USB Flash
Memory (Export)
Images and audio recorded on this unit can be saved
(exported) as video, still pictures, or in database format, and
be viewed on computers outside the surveillance system.
● A surveillance computer may write recorded images and
audio sounds to a USB flash memory or the desktop.
● When using a USB flash memory, connect the USB flash
memory to the front of this unit beforehand.

Saving as a Video or Still Image

1
Click the [Playback] tab
2
Enter start date/time and stop date/time in the
[Export] section
● When you click [Set] in [Start time], the date/time is
entered in the master time display part in [Time
Navigation].
● When you click [Set] in [End time], the date/time
displayed in the master time display part in [Time
Navigation] plus 1 second is entered.
Caution:
● You may fail to use [Export] if images to export contain
ones with a large time gap by changing the time. In this
case, export images separately, images before changing
the time and ones after changing the time. (Example:
summer time, etc.)
162
3
Select a camera from the [Source:] list
4
Click [AVI/JPEG Export...]
The export dialog will appear.
● Ensure that the start and end date/time and camera
name you entered are displayed.
Note:
● Preparation for export may take a while depending on
connection status of additional HDD(s).
5
Select the export format
● Select [AVI] (movie clip) or [JPEG] (still image).
● Select whether to display the time in the image to
export.
6
If you have selected [AVI], select a frame rate
● Select either [Full] to transmit all images to an AVI file,
or [Half] to transmit images for each second to
decrease the AVI file size (images are played back in
real time).
7
When AVI format is selected, select the codec
type from the [AVI codec] list