JVC VR-X3200U Instructions Manual page 98

<Recorder Part> Reference
Item
Camera (Camera Properties)
Camera General
Properties camera
settings
Frame rate Frame rate
selection
(MJPEG)
Caution:
● Be sure to set the frame rate so that the total frame rate does not exceed the performance capacity of this unit. For the
performance of this unit, see ARecording/Displaying live images/Distribution performanceB (APage 194).
92
Preset Values
Enabled Select check box
Do not select check
box
^
Camera name
^
Camera
shortcut number
Regular frame 1 to 10, 15, 20, 25,
rate: 30,
Live frame rate Second, Minute, Hour
20 Second
Regular frame 10.00 Second
rate:
Recording frame
rate
Enable speedup Select check box
Do not select
check box
Speedup frame 20 Second
rate:
Live frame rate
Speedup frame 10.00 Second
rate:
Recording frame
rate
On motion Select check box
Do not select
check box
On Event Select check box
Do not select
check box
^
Start event
Stop event
Configure Hardware input
events events
Manual events
Generic events
^
Description
Select this check box to use this camera. Default value
varies depending on the camera.
The name is used to identify the selected camera. Do
not assign the camera name already used for other
devices.
● The "Camera name" is not the name specified for the
camera unit, but for identifying the camera on this
unit.
● The following characters cannot be used.< > & ' " \ /
|
: * ? [ ]
For specifying the camera number.
● Do not assign a camera number that is used by other
cameras.
For specifying the frame rate for live display.
For specifying the frame rate for recording.
● The values that can be specified differ depending on
the settings for [Regular frame rate: Live frame rate].
● You cannot specify values larger than [Regular frame
rate: Live frame rate].
Select this check box to use the speedup function.
● The speedup function is enabled by [Motion
detection] or [Event].
For specifying the frame rate for live display when the
speedup function is enabled.
● The values that can be specified differ depending on
the settings for [Regular frame rate: Live frame rate].
● You cannot specify values smaller than [Regular
frame rate: Live frame rate].
For specifying the frame rate for recording when the
speedup function is enabled.
● The values that can be specified differ depending on
the settings for [Speedup frame rate: Live frame rate].
● You cannot specify values larger than [Speedup
frame rate: Recording frame rate].
For specifying whether or not the speedup setting is
enabled to increase the frame rate for recording when
any motion detection or event occurs. Select this check
box to enable it.
● If the [Event] check box is selected, set the start
event and stop event.
Select an event and click [Open] to display the settings
screen for the selected event.