Table of Contents
Advertisement
<Recorder Part> Applications
Events and Actions
(continued)
Action Setup—Distributing Camera
Images (Matrix) (continued)
3
Select the [Enable Matrix] check box
4
Enter recipient properties and click [Add]
Specify the information in the following items.
Item
Name
Recipient's name
Address
Recipient's IP address
Port
Recipient's port number
Password
Recipient's password
● Click [Clear] to cancel all entries.
● If the Smart Client is installed in the recipient's
terminal, select the [Matrix recipient is a Smart Client]
check box.
Caution:
● Do not set multiple Matrix recipients to the same port.
54
Description
5
Click [Matrix Event Control]
A list of events for each recipient is displayed.
6
Select an event for each recipient
When relating Matrix to events, right-click the event name
and select a method from [Connect], [Disconnect, then
connect], or [Disconnect].
Caution:
● When multiple Matrix windows are set by the recipient,
select [Connect]. If [Disconnect] or [Disconnect, then
connect] is selected, the connection information of the
Matrix window and the camera will be erased and images
will not displayed in windows with [Window Index]
(A Page 177) set to [2] or higher.
7
Select a camera to distribute live images to
computer(s).
Right-click the action ([Connect], [Disconnect, then
connect], or [Disconnect]) selected in step 6, then specify
settings of the camera.
8
Click [OK]
The image distribution by event has been set.
Caution:
● If Matrix images are not displayed, select [Block, and
reconnect] and reconnect. If images are not displayed
even when connected, check the Matrix settings such as
the recipient's port number, the event settings, and
whether or not an event has occurred.
Note:
● You need to perform settings of Smart Client from the
recipient to distribute images. See ASetting the Matrix
Display AreaB (A Page 177) to specify the display
position of the images.
Advertisement
Table of Contents
