Call Waiting - LG nomandIP User Manual

Key Phone Features
DIRECTED CALL PICK-UP
A station may answer ("Pick-Up") incoming and
transferred Intercom, CO and IP calls ringing at another
station. All ringing calls are subject to Directed Call Pick-
up, except private lines and queue callbacks.
1. Dial the Directed Call Pick-up access code [7].
2. Dial the ringing station's intercom number.
3. Press [Send].

Call Waiting

Call Waiting is used to notify a busy station that an
Intercom call is waiting. The busy station is notified of
the call waiting by a camp-on tone.
After receiving a busy signal, calling station can camp-on
called station. The called station can respond as follows:
- Answer waiting call (after placing active call on Hold)
- Send a Silent Message
- Activate a One-Time DND
- Ignore the Camp-On tone
After receiving an intercom busy tone:
You can press [*], or dial the last digit of the called
station number. (Called station will hear camp-on tone.)
- The called party can press [Send] to connect to you.
The 1st calling party is automatically placed on hold.
- When you finish your call, the called station can press
[Send] to continue speaking with the 1st calling party.
Nomad IP User Guide
DRAFT
Pressing the [End] button releases the
active call (CO call or intercom call).
DRAFT
27
Month 2006