System - LG nomandIP User Manual

60

System

DIRECT SEND / REMOTE MODE / SAME ROUTER
These menus are all related to the MFIM/VoIP card
configuration. For normal interaction with an MFIM/VoIP
card in TeleniumIP
should be configured like one of the IP phones.
- For detailed descriptions about Direct Send/Remote
Mode/Same Router, refer to the IP phone section in the
TeleniumIP
DIRECT SEND
The Nomad IP
card when the Direct Send value is set to NO. This allows a
user to register to the MFIM/VoIP card without knowing
the IP address of the MFIM/VoIP card.
If there is more than one MFIM/VoIP card in the same IP
Subnet, a user can selectively register to a specific MFIM/
VoIP card by setting its value to YES.
SYSTEM IP
This menu shows the IP address of MFIM/VoIP card.
STATION SET
This feature is not applicable to
with TeleniumIP
Nomad IP User Guide
DRAFT
/ XTS-IP
/ XTS-IP / XTSc-IP
can automatically locate an MFIM/VoIP
/ XTS-IP / XTSc-IP
DRAFT
Settings [Main Menu + 5]
/ XTSc-IP systems, the
Technical Manuals.
Nomad IP
systems.
Nomad IP
phones used
Month 2006