Connecting To A Computer; Pc/Macintosh - Philips bCool XG1 User Manual

PC/Macintosh

Philips Multimedia Projector
4. Installation
1 Connect connector 1 of the VESA M1-A to VGA/USB cable supplied, to the Data in socket of
your projector.
2 Connect connector 2, to the Data (out) socket of the computer.
3 Connect the USB connector (3) to the USB (downstream) socket of the computer.
– You can now manipulate the mouse cursor on the computer and on the screen, using
Cursor Control on the remote control. When using the USB connection, make sure
Windows 98, Windows ME, Windows 2000 or Windows XP is installed on the computer.
– The display settings of the computer will be changed to fit the capability of the projector.
• If required you can connect the Audio out socket of the computer to the Audio in socket of
the projector.
For this, use the Audio minijack to minijack cable (4) supplied.
– Audio information from the Computer will then be played via the projector speaker.
• When switching on, first switch on the projector and then the PC.
14

Connecting to a computer

Video Video Audio in Audio in S-Video S-Video Data in Data in
Projector Projector
1
4 3
COMPUTER COMPUTER
Audio out USB
Data out
English User guide bCool XG1
>
Mac/PC
2