Setup Adjustments; Operation; On Screen Display Menu - Philips bCool XG1 User Manual

Menu OK
Menu OK
Source Source Auto Image Auto Image
Lamp Lamp Temp. Temp.
Philips Multimedia Projector

5. Operation

Setup adjustments

• Press Menu and select Setup in the menu bar.The following Setup adjustments can now be
made according to the instructions under 'General explanation':
– Language
selects the required menu language;
– Keystone
corrects picture distortion of the vertical keystone type by internal scaling;
– Mirror
mirrors the picture for use of the projector in various positions with respect to the
user(s) and the projection screen;
-- Source
selects the current projection source (Auto, Computer, DVI,YPbPr,YCbCr, RGBS, S-Video
or Video). If you select 'Auto', the projector will always automatically search for available
input signals.
– Factory settings
resets all user settings to the default factory settings;
– Picture Format
selects one of five picture format options (4:3, 16:9, letter box, pan & scan and
4:3 original).
Due to the scaling of the image when the picture format is changed, it might be possible that a
part of the actual image is missing at the top or the bottom of the screen. With Cursor Control
you can adjust the position of the projected image upwards or downwards.
– Volume
adjusts the sound level;
– System information
the System Information sub menu contains an overview of the most relevant projector
settings, including information on the hardware and software configuration;
-- Feedback
To suppress OSD messages. Warning or error messages however are never suppressed.
-- Lamp counter
To show the operating time of the lamp, which can be reset after a new lamp has been
installed;
-- SmartDimmer
switches on the power saving mode by reducing the lamp power from 180W to 150W.
When SmartDimmer is switched on (150W), the audible (fan) noise will be reduced and
gray scales in the picture are optimized. When SmartDimmer is switched off (180W),
peak brightness in the picture is obtained. Default setting for data and component sources
(Data in) is Off; default setting for video sources (Video, S-Video) is On.
23
On Screen Display Menu <
English User guide bCool XG1