Remote Control - Philips bCool XG1 User Manual

Stand by On 1
Mouse Left/Right 2
– Volume + 3
Menu 4
Source 5
D(igital)-Freeze 6
D(igital)-Zoom 7
A(udio)/V(ideo) Mute 8
Cursor Control 9
OK 0
Laser !
Laser pointer @
Philips Multimedia Projector
2. Functional overview
!
2
Left
VOLUME
3
MENU
4
AV MUTE
8
SOURCE D-FREEZE
5
6
Laser pointer remote control
To switch the projector in or out of the Power/Standby mode.
Function as the Left and Right mouse keys of your pc when USB connection has been made.
To adjust the volume.
To activate and de-activate the menu.
To select the current projection source (Auto, Computer, DVI,YPbPr,YCbCr, RGBS, S-Video or
Video).The button toggles between the seven signals.
To capture a (moving) picture.The button toggles between the Freeze mode and the display
situation.
To magnifie the size of the projected image. Use Corsor control to select the zoom centre and
D(igital)-Zoom
press
To mute the sound of the projector and to mute the picture.
To manipulate the mouse cursor on the connected computer as long as the menu is not active.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
Note
The Cursor Control can only function as a mouse cursor when the projector is connected to the USB
connector of the computer. Windows 98, Windows ME, Windows 2000 or Windows XP should be
installed on the computer when you make the USB connection.
To confirm actions in the menu when the menu is on screen.
To activate the laser pointer to indicate items on the screen.
Note: The laser pointer sends out a laser beam. Do not look into this beam!
Exit point of laser pointer.
Note
The maximum range of the remote control is approximately 7 m (± 25 feet).
8
@
6
Laser
MOUSE Right
OK
0
9
Stand by
On
1
D-ZOOM
7
to select the required zoom factor: 1 x, 4 x, 9 x or 16 x.

Remote control

English User guide bCool XG1
<