Networking; Night Service - NEC Aspire Product Description

Networking

• Available
Description
Use the built in networking feature to integrate multiple phone systems into a single "virtual" com-
munications system. Interconnected with T1 tie lines, each phone system becomes a node on the
network that can communicate with any other phone system node.
For additional information on Networking, refer to the Aspire Networking Guide

Night Service

• Available
Description
Night Service lets system users activate one of the Night Service modes. Night Service redirects
calls to their night mode destination, as determined by Assigned and Universal Night Answer pro-
gramming. The system allows Night Service to be enabled for each Night Service group (01-32),
allowing each group to determine when their calls should switch modes. A user typically activates
Night Service after normal working hours, when most employees are unavailable to answer calls.
The system also provides external contacts to enable Night Service.
Product Description
Aspire
Centralized Network Attendant
Centralized Network Attendant allows multiple networked systems to share a single central-
ized attendant. This centralized attendant can receive calls from and transfer calls to any desti-
nation in any network node. Unanswered calls recall and route as if they were part of a single,
much larger system.
Optionally, up to four Voice Mail systems can share the voice messaging requirements of an
entire network. Each of the Voice Mail systems is dedicated to a portion of the total network
and is responsible only for supporting that portion
Flexible Network Routing
Use network routes to set up "single channel" networking between many separate systems - or
use multiple networking channels per system for greater network performance. Data tables in
the system program define the routing for each extension in each network node. These tables
are easily customized to meet the requirements of each networking configuration.
Aspire
Section 3: Features
(P/N TBD).
3
93