Specifications - Toro Sand Pro 5040 Service Manual

Specifications

Item
Hydrostatic Transmission
Maximum Pump Displacement
Maximum Pump Flow Rate (98% efficiency @ 3400 RPM)
Charge Pump
Charge Pump Displacement
Charge Pump Flow Rate (60% efficiency @ 3400 RPM)
Charge Relief Setting
Implement Relief Setting
Traction Relief Setting
Wheel Motors
Front Wheel Motor Displacement
Rear Wheel Motor Displacement
Steering Control Valve (Sand Pro 5040 & Infield Pro 5040)
Hydraulic Tank Capacity
Hydraulic Filter
Hydraulic Oil
Hydraulic System
Variable displacement piston pump, In–Line type
Page 4 – 2
Sauer–Danfoss (Sundstrand),
Axial Piston Design, Model Series 15
3
0.913 in /rev (15.0 cm
13.2 GPM (50.0 LPM)
Gerotor Pump in Hydrostat
3
0.33 in /rev (5.4 cm
2.9 GPM (11.0 LPM)
135 PSI (9.3 bar)
1100 PSI (75.9 bar)
3200 PSI (220.7 bar) in Forward Direction
Orbital rotor motor
3
17.1 in /rev (280 cm
3
8.6 in /rev (141 cm
Sauer–Danfoss Steering Unit, Type OSPM
5 US gallons (18.9 liters)
10 Micron (nominal) spin on cartridge type
See Traction Unit Operator's Manual
Sand Pro & Infield Pro 3040/5040
Description
3
/rev)
3
/rev)
3
/rev)
3
/rev)