Display Board Diagnostics; Exiting The Diagnostics System - Electrolux Washing machine Service Manual

9.2.1

Display board diagnostics

After entering the diagnostics system, the display board is checked: all LEDs and the display light in
sequence (if featured).
Pressing the buttons the corresponding LEDs light; the display shows the relative code to the
codification of the button and the buzzer sounds.
When the "FABRICS" (1) or "TEMPERATURE" (2) button is pressed, the relative LEDs light for a
second and the button code is displayed; at the end of the beep of the buzzer the diagnostics
programme passes one phase forward or back.

9.3 Exiting the diagnostics system

To exit the diagnostics system switch the appliance off,
then on and then switch off again.
SOI/DT 2005-07 dmm 49/59 599 37 22-15