Electrolux Washing machine Service Manual page 54

E54
Motor relay contacts sticking
E61 Insufficient heating during washing
E62
Overheating during washing
E66 Heating element power relay faulty
E71 Washing NTC sensor faulty
E74
Washing NTC-sensor badly positioned
Communication error between main PCB- display
E91
board
Communication incongruence between main PCB-
E92
display board
(versions not compatible)
E93 Incorrect configuration of appliance
E94
Incorrect configuration of washing cycle
Communication error between microprocessor and
E95
EEPROM
Incongruence between button and cycle
E97
configuration
EB1
Frequency of appliance incorrect
EB2
Voltage too high
EB3 Voltage too low
Drain filter blocked
EF1
(drain phase too long)
Overdosing of detergent
EF2
(too much foam during drain phases)
EF3 Intervention of aqua control
E00 No alarm
SOI/DT 2005-07 dmm
PCB faulty; current leakage from motor or from wiring
NTC sensor faulty; heating element faulty; wiring faulty; PCB faulty.
NTC sensor faulty; heating element faulty; wiring faulty; PCB faulty.
PCB faulty; current leakage from heating element to ground.
NTC sensor faulty; wiring faulty; PCB faulty.
NTC sensor badly positioned; NTC sensor faulty; wiring faulty; PCB
faulty.
Wiring faulty; control/display board faulty
Main PCB faulty.
Wrong control/display board;
Wrong PCB (do not correspond to the model).
Incorrect configuration data; PCB faulty.
Incorrect configuration data; PCB faulty.
PCB faulty.
Wrong configuration data.
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Power supply problems (incorrect / disturbance); PCB faulty.
Drain tube blocked/kinked/too high;
Drain filter dirty/blocked.
Excessive detergent dosing; drain tube kinked/blocked;
Drain filter dirty/blocked.
Water leakage into base; aqua control device faulty
---
54/59
Cycle blocked, door locked (after 5
attempts)
The heating phase is skipped
Safety drain cycle – Cycle stopped
with door open
Safety drain cycle – Cycle stopped
with door open
The heating phase is skipped
The heating phase is skipped
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Cycle interrupted
Warning displayed at the end of cycle
(specific LED)
(specific LED)
Water drain; cycle blocked
---
599 37 22 15
OFF/reset
---
OFF/reset
OFF/reset
Start
Start
---
---
OFF/reset
OFF/reset
OFF/reset
OFF/reset
---
---
---
Start
---
---