Table Of Alarm Codes - Electrolux Washing machine Service Manual

Washing machines with ewm 1000 plus electronic control system and “delta 3” display board
Hide thumbs Also See for Washing machine:
Table of Contents

Advertisement

10.6 Table of alarm codes

Alarm
Description
E11
Difficulties in water fill for washing
E13
Water leakage
E21
Difficulties in draining
E23
Drain pump triac faulty
E24
Fault in "sensing" circuit of drain pump triac
Incongruence between closure of anti-boiling and
E33
1st level pressure switch contacts
E35
Water overflow (flooding)
Fault in "sensing" circuit of anti-boiling pressure
E36
switch
E37
1st level sensing circuit faulty
E39
"HV" sensor of anti-overflow level faulty
E41
Door open
E42
Problems of door closure
E43
Interlock power supply triac faulty
E44
Door interlock sensor faulty
E45
Door interlock sensing circuit triac faulty
E51
Motor power supply triac short-circuited
E52
No signal from motor Tachimetric generator
E53
Motor triac sensing circuit faulty
SOI/DT 2005-07 dmm
Possible fault
Tap closed or mains pressure insufficient; drain hose incorrectly
positioned; water fill solenoid faulty; leaks from the hydraulic circuit of
the pressure switch; pressure switch faulty; wiring faulty; PCB faulty.
Drain hose incorrectly positioned; mains pressure insufficient; water fill
solenoid faulty; leakage/blockage of pressure switch hydraulic circuit;
pressure switch faulty.
Drain hose kinked/blocked/incorrectly positioned; drain filter
blocked/dirty; drain pump faulty; wiring faulty; PCB faulty; current
leakage from heating element to ground.
Drain pump faulty; wiring faulty; PCB faulty.
PCB faulty.
Pressure switch faulty; current leakage from heating element to
ground; heating element; wiring faulty; PCB faulty.
Water fill solenoid faulty; leakage from pressure switch hydraulic
circuit; pressure switch faulty; wiring faulty; PCB faulty.
PCB faulty.
PCB faulty.
PCB faulty.
Door interlock faulty; wiring faulty;
PCB faulty.
Door interlock faulty; wiring faulty;
PCB faulty.
Door interlock faulty; wiring faulty;
PCB faulty.
PCB faulty.
PCB faulty
PCB faulty; current leakage from motor or from wiring.
Motor faulty; wiring faulty; PCB faulty
PCB faulty.
53/59
Action/machine status
Cycle paused with door closed
Cycle paused with door closed
Cycle paused
Safety drain cycle – Cycle stopped
with door open
Safety drain cycle – Cycle stopped
with door released
Safety drain cycle – Cycle stopped
with door open
Cycle blocked. Safety drain cycle.
Drain pump always in operation (5
minutes on, 5 minutes off etc.)
Cycle blocked, door locked.
Cycle blocked, door locked.
Cycle blocked, door locked.
Cycle paused
Cycle paused
(Safety drain cycle) Cycle blocked
(Safety drain cycle) Cycle blocked
(Safety drain cycle) Cycle blocked
Cycle blocked, door locked (after 5
attempts)
Cycle blocked, door locked (after 5
attempts)
Cycle blocked, door locked
599 37 22 15
Reset
Start
Start
Start
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset
Start
Start
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset
OFF/reset

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewm 1000 plus

Table of Contents