Control Panel; Fabrics" Button - Electrolux Washing machine Service Manual

4 CONTROL PANEL

The configuration of the control panel depends on the following:
Type of control/display board
Design of the control panel ( max.9 buttons, LEDs)
Different configuration of the buttons
1.

"FABRICS" Button

2. "TEMPERATURE" Button
3. "SPIN" Button
4. "OPTIONS" Button
5. "OPTIONS" Button
6. "OPTIONS" Button
7. "START/PAUSE" Button
8. "SKIP/RESET" Button
9. "DELAYED START" Button
10. Programme phase/warning LEDs
11. Display
12. ON/OFF Button
13. Pilot lamp
4.1 "Fabrics" Button
The programme is chosen on the basis of the type of washing by pushing
this button in sequence. The corresponding LED lights.
The machine proposes the standard programme for the type of fabric
selected: the display shows a temperature and the maximum spin speed for
the selected programme (and the normal soil level).
These values can be modified using the relative buttons. The display
indicates the duration of the selected programme, calculated on the basis of
the maximum load for each type of fabric; the START/ PAUSE button pilot
lamp begins to flash.
The type of fabric can be modified during the washing phase: in this case the
cycle will restart from the beginning, with the water level (if the water level is
not sufficient the necessary level for the new cycle is reset) and the
detergent quantity previously filled.
The table below shows the options that the user can select for each model:
LED Configuration type A
L1
L2
L3
L4
L5
SOI/DT 2005-07 dmm
Cotton
Synthetics
Delicates
Wool
Hand wash
Configuration type B
Cotton
Synthetics
Delicates
Hand wash
Mini (30º/30min)
6/59
Configuration type C
Cotton
Synthetics
Delicates
Wool
------
599 37 22 15