Removal And Replacement Procedures All-In One (Aio) Chassis; Preparing To Disassemble The Computer - HP 100B Maintenance & Serice Manual

6 Removal and Replacement Procedures
All-in One (AIO) Chassis
The following sections provide information about disassembling various components of the HP Pro
All-in-One.

Preparing to Disassemble the Computer

To avoid injury and equipment damage, always complete the following steps in order, when opening
the HP Pro All-in-One.
1. Remove all media (CD, DVD, etc.) from the computer.
2. Shut down the computer.
3. After the system has completely shut down, disconnect the power adapter from the back of the
computer.
4. Disconnect all other attached cables from the back of the computer.
5. Place the computer face down on a soft flat surface. HP recommends that you set down a
blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other
damage.
WARNING!
26 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Beware of sharp edges inside the chassis.