Power Button Board And Cable - HP 100B Maintenance & Serice Manual

Power Button Board and Cable

Description
Power switch board assembly
Power button board cable
The power button board is located on the top right side of the computer (when viewed from the back).
It is secured with two screws and has one connector.
The power button board cable connects to the bottom of the board and to the system board.
Figure 6-44
To remove the power button board:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the tape (1) and two screws (2) that secure the board to the computer.
NOTE:
60 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
Power button board location
26).
Rear Cover on page
Note the location of the grounding cables for proper replacement.
Preparing to Disassemble the Computer
27).
Spare part number
649230-001
646782-001