Heat Sink (Thermal Module) - HP 100B Maintenance & Serice Manual

Heat Sink (Thermal Module)

Description
Heat sink (thermal module)
The heat sink is secured with three captive screws.
To remove the heat sink:
1. Prepare the computer for disassembly (see
on page
2. Remove the system board shield (see
3. In the order indicated by the numbers stamped into the heat sink, remove the three Phillips
screws that secure the heat sink to the system board.
Figure 6-49
4. Lift the heat sink off the system board.
To replace the heat sink, reverse the removal procedures.
26).
Removing the heat sink
Preparing to Disassemble the Computer
System Board Shield on page
Spare part number
646799-001
63).
Heat Sink (Thermal Module) 65