Optical Drive Bracket - HP 100B Maintenance & Serice Manual

Optical Drive Bracket

Description
Optical drive bracket
The optical drive bracket is located under the optical drive. You must remove the optical drive to
access the bracket, which is secured by five screws.
To remove the optical drive bracket:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the optical drive (see
4. Remove the five Torx T15M3.0x6.0 screws (1) that secure the optical drive bracket to the
computer.
5. Lift the bracket from the computer (2).
Figure 6-40
To install the optical drive bracket, reverse the removal procedures.
56 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis
26).
Rear Cover on page
Optical Drive on page
Removing the optical drive bracket
Preparing to Disassemble the Computer
27).
33).
Spare part number
646805-001