KNX Technical Reference Manual
®
ABB-i-Bus
-KNX Millenium
Note
The following parameters are available only when parameter "Additional heating stage" or
"Additional cooling stage" is set on "activated".
Additional parameters for "Control
function = Heating"
Output additional stage heating
Mode of the control value of the additional
stage heating
Temperature difference additional stage
heating (x 0,1K)
upper hysteresis of the additional stage
heating (x 0,1K)
cyclical sending of the control value
additional stage heating (min)
Additional parameters for "Control
function = Cooling"
Output additional stage cooling
Mode of the control value of the additional
stage cooling
Temperature difference additional stage
cooling (x 0,1K)
lower hysteresis of the additional stage
cooling (x 0,1K)
cyclical sending of the control value
additional stage cooling (min)
KNX Technical Reference Manual | 1473-1-7819
Settings
• 2-point 1-bit (Off/On)
• 2-point 1-byte (0/100%)
• Normal
• inverse
0 ... 255
0 ... 255
1 ... 60
Settings
• 2-point 1-bit (Off/On)
• 2-point 1-byte (0/100%)
• Normal
• inverse
0 ... 255
0 ... 255
1 ... 60
Description of applications /
Comments
–
–
–
–
–
Comments
–
–
–
–
–
objects
— 59 —