Check Paper setting
If the Check Paper setting is set to On, the
machine displays a message asking if you
want to change the paper type and paper size
setting. This message will appear each time
you pull a tray out of the machine or load
paper in the MP Tray. The default setting is
On.
a
Press
(Settings).
b
Press All Settings.
c
Swipe up or down or press a or b to
display General Setup.
d
Press General Setup.
e
Swipe up or down or press a or b to
display Tray Setting.
f
Press Tray Setting.
g
Swipe up or down or press a or b to
display Check Paper.
h
Press Check Paper.
i
Press Off (or On).
j
Press
.
Recommended print media
2
To get the best print quality, we recommend
using the following paper:
Brother paper
Paper Type
Premium Plus Glossy
Photo
Ledger
Letter
4" 6"
Plain Inkjet
Ledger
Handling and using print
media
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped
1
1 0.08 in. (2 mm) or greater curl may
cause jams to occur.
• Extremely shiny or highly textured
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a short grain
Loading paper
2
Item
BP71GLGR
BP71GLTR
BP71GP20
BP60PLGR (USA only)
2
1
23
2