Brother MFC-J5520DW User Manual page 64

Error Message
Ink Low
Low Temperature
Media Error
Media is Full.
No Caller ID
No Ink Cartridge
52
Cause
One or more of the ink cartridges are
near the end of their life. If one of the
color ink cartridges is near the end of
its life and someone is sending you a
color fax, your machine's
"handshake" will ask that the fax be
sent as black and white. If the
sending machine has the ability to
convert it, the color fax will be printed
at your machine as a black and white
fax.
The room temperature is too low.
The memory card is either corrupted,
incorrectly formatted, or there is a
problem with the memory card.
The memory card or USB flash drive
you are using already contains 999
files.
The memory card or USB flash drive
you are using does not have enough
free space to scan the document.
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
An ink cartridge is not installed
correctly.
Action
Order a new ink cartridge. You can
continue printing until the
Touchscreen displays
Cannot Print. (See Ordering
accessories and supplies on page ii.)
To replace the ink cartridges,
see Online User's Guide: Replace the
Ink Cartridges.
After warming the room, allow the
machine to warm up to room
temperature. Try again when the
machine has warmed up.
Remove the memory card from the
media drive (slot) of the machine and
format it correctly.
Put the card firmly into the slot again
to make sure it is in the correct
position. If the error remains, check
the media drive (slot) of the machine
by putting in another memory card
that you know is working.
Your machine can save to your
memory card or USB flash drive only
if it contains less than 999 files.
Delete unused files and try again.
Press .
Delete unused files from your
memory card or USB flash drive to
make some free space, and then try
again.
If you want to use the Caller ID
feature, call your telephone company.
(See Online User's Guide: Caller ID.)
Take out the new ink cartridge and
reinstall it slowly and firmly until it
latches.
(See Online User's Guide: Replace
the Ink Cartridges.)