Sony HDC-X300 Operation Manual page 28

Repeat steps 1 and 2.
By selecting INS on the line below the character, list,
you can enter a space at the cursor position.
Selecting DEL deletes the character at the cursor
position.
You can return to step 1 without changing the
character by selecting RET.
If you enter the permitted maximum number of
characters (up to the stop mark at the right end of the
line), the cursor moves to ESC on the line below the
character list.
To register the new string you have set, select END
and press the ENTER button.
To restore the previous string, select ESC and press
the ENTER button.
Caution
If any of the following messages is displayed when you
enter Menu mode, immediately stop using the camera and
contact Sony service personnel:
HIGH TEMPERATURE!: The temperature inside the unit
is extremely high.
FAN DOES NOT WORK!: The fan is not operating even
when needed.
HIGH TEMP! CAM SHUTDOWN!: The temperature
inside the unit exceeds the limit, and some circuit
blocks stop operating (no camera picture is obtained).
28
Menu Operations